RemotEye 4 User Manual – 90988-007
37
username and/or password, and not for triggered events. This email text box is optional, so it is not
required.
Confirm Email
: Confirm Email, if used.
Login Screen
: If this option is disabled, it will take them directly to the default with only read only access.
Guest Mode
: Select to Disable/Enable “Guest Mode” button login. If this is disabled, it will not be
displayed in the “log in: screen. If this button is enabled, when pressed, it will direct the user to the default
with only read only access.
o
Guest Mode
and
Log In Screen
Enabled: Get both options when IP address is entered in URL.
Fig. A.
o
Guest Mode
Enabled
, Log In Screen
Disabled: User directed straight to default with read only
access when IP address is entered in URL. See Fig. B.
o
Guest Mode
Disabled
, Log In Screen
Enabled: User will only get the Log In button when IP
address is entered in URL. See Fig. C.
A
B
C
Figure 5-3 Login/Guest Mode Settings
Press “Next”
FIRT TIME SETUP – RemotEye 4 Settings (See Figure 5-4 )
System Name
: Enter System name. (Default: “
TOSHIBA
”)
System Contact
: Enter System Contact. (Default: “
Technical Support Team
”)
System Location
: Enter system location. (Default: “
”)
IP Address
: Enter “IPv4 Address” – Display default IP, or the assigned IP address from BOOTP/DHCP
server or from the console settings setup. (Default:
192.168.1.168
)
Gateway Address
: Enter Gateway Address - Display default gateway IP, or the assigned Gateway IP
address from BOOTP/DHCP server or from the console settings setup. (Default:
192.168.1.1
)
Subnet Mask
: Enter “Subnet Mask” - Display default Subnet Mask, or the assigned Subnet Mask from
BOOTP/DHCP server or from the console settings setup. (Default:
255.255.255.0
)
DNS Address
: Enter “DNS Address” IP address – Display default DNS Address 0.0.0.0, or the assigned
DNS address from a BOOTP/DHCP server or from the console settings setup. (Default:
0.0.0.0
)
IPv6 Link-Local Address
: Enter “IPv6 Link-Local Address” – Display default IPv6 Link-Local address,
or the assigned IPv6 Link-Local address from BOOTP/DHCP server or from the console settings setup.
(Default:
FE80::2E0:D8FF:FExx:xxxx
the last six "x" is the mac address)
IPv6 Global Address
: Enter “IPv6 Global Address” – Display default IPv6 Global Address, or the
assigned IPv6 Global Address from BOOTP/DHCP server or from the console settings setup.
Summary of Contents for RemotEye 4
