2. Click
Menu
>
Advanced
.
3. In
Internet
connection, select the connection you want to use for general Web access,
and click
Done
.
4. Similarly, select the connection you wish to use for the WAP network
5. The
Work Network
connection is used if you are planning to use a Virtual Private
Network connection.
4.3 Bluetooth
Bluetooth is a short-range radio frequency technology that connects devices together for
transmitting voice and data. The range is usually up to 10 metres, and typical applications
are for connecting your phone to Bluetooth wireless headphones and Bluetooth Global
Positioning System (GPS) units.
Bluetooth works by creating a pairing between two devices. This pairing is known as a
‘partnership’. This partnership exists if the devices are moved out of range of each other
or even if the devices are switched off. When the devices are switched back on or are
moved into range, they will be connected with each other without needing to bond them
again.
Bluetooth has 3 modes: Off, On and Visible. When the Bluetooth is Off, there is no power
to the Bluetooth radio and so it does not function. When Bluetooth is set to On, your
device will be connected to the devices it is already bonded with, but new devices will not
be able to find your device. In Visible mode your device will act as the On state, but it will
be also found by other devices and you will also be able to receive information being
beamed to it.
Turn Bluetooth On and Off
By default Bluetooth is turned off. If you turn it on, and then turn off your device, Bluetooth
also turns off. When you turn on your devide again, Bluetooth turns on automatically.
1. On the Home screen, click
Start
>
Settings
>
Connections
>
Bluetooth
.
2. Tick the box for ‘Turn on Bluetooth’ to activate it. Untick this box to deactivate.
Summary of Contents for RG4-E01
Page 92: ...Click this now and follow thru the steps in screenshots ...
Page 93: ......