turned on.
End a Bluetooth partnership
1. On the Home screen, click
Start
>
Settings
>
Connections
>
Bluetooth
.
2. Click
Menu
>
Devices
.
3. Select the Bluetooth partnership you want to end.
4. Click
Menu
>
Delete
.
Make your device visible to other Bluetooth devices
Your device must be set to visible:
• To receive beamed information
• To allow beaming devices or computers to detect your device.
• For your
device
to offer services to other devices (such as Internet Sharing)
1. On the Home screen, click
Start
>
Settings
.
2. Click
Connections
>
Bluetooth
.
3. Select
Make this device visible to other devices
in the Bluetooth screen.
Other Bluetooth-enabled devices can now detect your device and attempt to beam
information to it, establish a Bluetooth partnership, or use a Bluetooth service.
Accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and that your device is visible.
2. When prompted to accept a Bluetooth partnership with
the other devices
, click
Yes
.
3. In
Passcode
, if you want to use a passcode (recommended for enhanced
security), enter an alphanumeric passcode between 1 and 16 characters, and click
Done
. You must enter the same passcode that was entered on the device requesting
the Bluetooth partnership.
The Bluetooth partnership is created. You can now exchange information with
the
other devices
the other device.
Overview of Bluetooth virtual COM ports
Some programs can connect only
through
a serial (COM) port. This can be true even
if the device itself is Bluetooth-enabled. To make it possible for such programs to use
a Bluetooth connection, you must set up a virtual COM port. Once created, this
virtual port can be used like any other COM port. You can use a virtual COM port for
programs that, for example, connect to a GPS receiver, or to connect to a
Bluetooth-enabled printer.
Summary of Contents for RG4-E01
Page 92: ...Click this now and follow thru the steps in screenshots ...
Page 93: ......