reminder.
1. Connect the phone to your PC using a USB connection (see the chapter on ActiveSync
setup for your PC).
2. On your PC, copy the sound file you want.
3. In ActiveSync on your PC, click Explore and double-click My Windows Mobile device .
Note:
For ring tones, the sound files can be in either midi, wma, mp3, mmr or wav file
format. For notifications or reminders, use either midi, wma, mp3,
mmr
or wav files.
When you select a sound, let the sound plays. To hear it again, select Menu > Play.
4. Do one of the following:
•
To save the sound file on your phone, double-click Application Data , double-click
Sounds , and paste the file into that folder.
•
To save the sound file on your storage card, double-click Storage Card , and paste the
file into the folder you want.
Specifying the sound for an event
1. On the Home screen, click
Start
>
Settings
>
Sounds .
2. Under an event, click a sound. The phone plays each sound as you select it. Click
None
if you don’t want to hear a sound.
3. Repeat for each event, and click
Done
.
To change the current profile
The Profile feature defines how your phone notifies you of incoming calls, alarms etc. For
example
Normal – For day-to-day use. Device will ring.
Silent – Device will not ring or vibrate.
Meeting – vibrates as you are in a meeting
1. On the Home screen, click
Profile [Type]
. Example:
Profile Normal .
2. Click a new profile, and click
Done
.
Note
:
Some profiles are selected by the device depending how it is being used at the
time. For example, the device will move to ‘Headset’ profile when you plug in a headset
You can also change the profile by using the Quick List.
Long-press the Volume Up
key on the side of the phone to select the desired profile.
The Automatic profile has special features. If you choose this profile the phone will act as
if in ‘Normal’ mode. However, if you have set up a calendar appointment, then the phone
will move to ‘meeting’ profile when the appointment takes place.
Customizing a Profile
1. On the Home screen, scroll down the screen then select and click
Profile [Type]
.
Example:
Profile Normal
.
2. Select the profile to edit.
3. Click
Menu
>
Edit
.
Summary of Contents for RG4-E01
Page 92: ...Click this now and follow thru the steps in screenshots ...
Page 93: ......