background image

 

 

Sign In and Out   

1. On the Home screen, click 

Start

 >

 Pocket MSN

.  

2. Click 

MSN Messenger

 > 

Sign in

 .   

3. Enter the e-mail address and password for your Microsoft Passport Network 
credentials or Hotmail account, and click 

Sign in

.  

Signing in to an account may take several minutes, depending on your connection speed 
and how busy your mobile network is. 

 To 

Signout 

,click To sign out, 

Menu

 >

 Sign out

 .   

Chapter 6 Synchronizing 

6.1 About ActiveSync   

ActiveSync allows you to create a synchronization relationship between your mobile 
device and PC, and between your mobile device and your Exchange server. This means 
that data shared between your mobile device and PC, or device and Exchange server is 
always consistent. If you make a change in one place, the next time you synchronize, the 
change is automatically made to the corresponding information on the other computer. 
No matter where you are viewing the information, you know it’s up-to-date.   
You may connect to your PC using a cable or Bluetooth connection. ActiveSync can also 
make it possible for your device to connect to other resources through your PC. However, 
you cannot synchronize remotely to a PC using a modem or network connection. The 
synchronization relationship is created in order to manage the data that is copied 
between your mobile device and PC.   
You may connect to your Exchange server using a cellular connection, or you can 
connect your device to your PC as a way of connecting back to the Internet. 

Summary of Contents for RG4-E01

























































































































Reviews: