background image

E6581277

c

- 20E -

7. Specifications

Item

Specifications

Part number

RKP002Z

Applicable model

Model with either an RS485 (2-wire type) connector or a common serial
connector (optional) with a baud rate of 9600, 19200 or 38400bps.

Communication

Automatic search:

Baud rate: 9600, 19200, 38400bps
Parity: even, odd, none

Communication method:

RS485 (2-wire type) or Common Serial Communication, switched by
Communication Mode Switch

Service environment

Indoor operation at an altitude of 1,000m or less and free from direct sunlight,
potentially corrosive or explosive gases, steam, dust particles, dust/dirt, and
machining fluids including grinding liquid and coolant

Ambient

temperature

-10 to +50°C

Storage

temperature

-25 to +65°C

Relative humidity

20 to 93% (free from condensation and vapor)

Vibration

5.9m/s

2

 (0.6G) or less (10 to 55Hz)

Cooling method

self-cooling

8. Warranty

  Any part of the unit that is proved to be defective will be repaired free of charge under the following

conditions:

1. This product will be repaired free of charge, if problem/fault occurs under normal handling within

one year of delivery and is caused obviously by a design or manufacturing defect.

2. The warranty applies only to the delivered unit.

3. For the following kinds of failure or damage, the repair cost shall be borne by the customer even

within the warranty period.

i) Failure or damage caused by improper or incorrect use or handling, or unauthorized repair or

modification of the inverter.

ii) Failure or damage caused by the unit falling or an accident during transportation after the

purchase.

iii) Failure or damage caused by fire, salty water or wind, corrosive gas, earthquake, storm or flood,

lightning, abnormal voltage supply, or other natural disasters.

iv) Damage due to the use of Remote Keypad for non-intended purposes.

4. If an additional warranty is provided then those conditions will also apply.

Summary of Contents for RKP002Z






















Reviews: