Toshiba RS4002Z-0, Instruction Manual

E6580938

−

12E

−

6. 

Communication parameters

Be careful the parameter setting range, initial value, etc. may change with the inverter models.

Function

Parameter

Note

Communication speed

f800

Communication speed must be the same in the same network
(Inverters, Host computer, RS485 units).

Parity

f801

Parity setting must be the same in the same network
(Inverters, Host computer).
Furthermore, set bit length using the setting switch referring to
parity bit specification. (Refer to page 

6

.)

Inverter number

f802

Do not assign the same inverter number in the same network
(Inverters, Host computer).
Need to set the inverter number in the transmission format.

7. 

Specifications

Item

Specifications

Part number

RS4002Z-0

Service environment

Indoors. Altitude of less than 1000m. (3280ft)
Must not be exposed to direct sunlight, subjected to corrosive and/or explosive
gases, vapor, dust, chips, cutting oil, grinding agent, etc.

Ambient  temperature From -10

°

C to +50

°

C (14

°

F to 104

°

F)

Storage temperature

From -25

°

C to +65

°

C (-13

°

F to 149

°

F)

Relative humidity

20 to 90% (no condensation allowed)

Vibration

5.9 m/s

2

 (0.6G) or less (10 to 55 Hz) (Conforming to JIS C0040)

8. 

Warranty

Any part of the RS485 Option Unit that proves defective will be repaired free of charge under the
following conditions:
1. If and when a trouble occurs on the option unit properly installed and handled within one year of    
    delivery, and if the trouble is clearly attributable to defects inherent in our design and manufacture,
      the product will be repaired free of charge.
2. The warranty covers only the delivered option unit.
3. Even in the term of the warranty, repair service will be charged for the following cases.
    1) Fault or damage resulting from misuse, unauthorized modification or repair.
    2) Fault or damage resulting from falling down of the product or traffic accident during transportation.
    3) Fault or damage originating from fire, salt water/salty breezes, some kind of gas, earthquake,
        storm or flood, lightning, abnormal supply voltage, other natural disasters.
    4) Fault or damage caused by improper use of this option unit as it is used for a purpose out of its
    original function.
4. If there is another special warranty contracted for this option unit, the special warranty has
    priority over this warranty.