Toshiba Satellite 200 Series User Manual Download

Page: 150 / 382

The Wide World of Multimedia

Recording Sounds as Wave Files

156

Using the Built-In Microphone

The easiest way to record is through the computer’s built-in micro-
phone. To do this, follow these steps:

1 Click Start, then point to Programs.

2 Point to Accessories, then point to Multimedia.

3 Click Sound Recorder.

Windows 95 opens the Sound Recorder window.

4 Click the record button.

It’s the red circle at the bottom right of the window.

Locating the built-in microphone

5 Speak normally into the microphone.

6 When you’ve finished recording, click the stop button.

The Sound Recorder window displays a waveform display of
the new sound file.

7 To hear what you just recorded, click the play button.

8 To save the file, choose Save from the File menu.

Microphone

Summary of Contents for Satellite 200 Series































































































































































































































































































































































































Search results

Summary of Contents for Satellite 200 Series

Reviews:

Related manuals for Satellite 200 Series

Brands by name

Popular brands

Toshiba Satellite 200 Series, User Manual

Search results

Summary of Contents for Satellite 200 Series

Reviews:

Related manuals for Satellite 200 Series

Brands by name

Popular brands