230
Using ConfigFree
TM
With Your Computer
Using Auto Switch
5.375 x 8.375 ver 3.1
You can access the Auto Switch feature in any of the
following ways:
❖
From the taskbar, right-click the
ConfigFree
icon, and
then click
Auto Switch
.
❖
From the Profile Settings screen, you can click the
Auto
Switch
button.
Auto Switch (Cable Disconnect)
If a wired network cable is disconnected from the network,
the Auto Switch (Cable Disconnect) option will
automatically switch to another network device.
❖
Enable Wireless when cable disconnect occurs
— If
your notebook computer is connected to multiple wired
LAN devices, and the physical connection to all of these
devices is disconnected, ConfigFree switches to a
wireless LAN device.
However, if the cable connection to only one wired LAN
device is disconnected, ConfigFree will not switch to a
wireless device.
Auto Switch (SSID)
The Auto Switch (SSID) option automatically switches to a
different profile if your notebook computer is connected to a
wireless LAN network and a network failure occurs.
ConfigFree detects the Service Set Identifier (SSID) of the
wireless network that you are connected to. If the SSID
matches the Wireless Network SSID specified in Auto
Switch, the ConfigFree switches to the corresponding profile.
If your notebook computer is connected to multiple wireless
LAN devices, the Auto Switch (SSID) feature is disabled. To
enable this feature, only one wireless LAN device can be used.
NOTE
