User’s Manual
3-24
Satellite A660/A665
8. Seat the memory module cover in place and secure it with one screw.
Figure 3-5 Seating the memory module cover
9. Install the battery pack - refer to
section in
Chapter 6,
, if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized -
to confirmed it,
Start
->
Control Panel
->
System and Security
->
System
icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the
Power
indicator is off (refer to
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
section in Chapter 6,
, if required).
5. Loosen the one screw securing the memory module cover in place -
please note that this screw is attached to the cover in order to prevent it
from being lost.
Take care to ensure that the memory module cover is firmly closed.
1. Memory module cover
2. Screw
1
2
