Before you install a device or application, save any data in memory to
the internal storage or other storage media. Failure to do so might
result in data loss.
Connecting/Removing TOSHIBA Keyboard Dock
TOSHIBA Keyboard Dock provided with some models can turn your tablet
into a laptop for extensibility including a physical keyboard and extra ports.
To use in laptop mode, you need to connect TOSHIBA Keyboard Dock to
the tablet by following the steps below:
1.
Hold middle-top side of the tablet (with the web camera on the top
side), and align the guide pins on the keyboard dock with the guide pin
grooves on the bottom of the tablet.
Figure 2-1 Connecting the keyboard dock
1
1
1. Guide pins
Product appearance depends on the model you purchased.
Please follow the illustrations above and do not reverse the tablet.
2.
Gently press down the tablet until hear it clicks into place. The docking
connector on the keyboard dock engages the docking interface on the
tablet.
The computer can be opened to a wide range of angles for optimal
viewing.
To do this, hold down the palm rest with one hand so that the body of
the keyboard dock is not raised, and slowly lift the computer with the
other hand holding the center position of the display screen (as shown
in the following figure).
User's Manual
2-3
