3.2 Quick Start
3 Diagnostic Programs
Satellite L350D,Satellite Pro L350D, EQUIUM L350D,SATEGO L350D Maintenance Manual
15
Script File Name
: Script file name, e.g. ‘
Custom
.INI’ in the above screen;
Current Time(C. TIME)
: Current system time, e.g. ‘C.TIME:2008-0
2
-16
00
:42:40’ in
the above screen;
Test Time Remaining (LEFT)
: In TIMEBOUND mode, it would display the remaining
test time at the same location as Current TIME (C. TIME) in the above screen;
Current Loop Count
: In LOOPBOUND mode, it will display the total LOOP number
planning to execute and the current LOOP number have been finished, e.g. ‘COUNT:
01/01’ in the above screen;
CPU Temperature
: Detect the temperature in the current CPU, e.g. ‘CPU:
56
C’ in the
above screen;
Remaining Battery Capacity
: Remaining Battery Capacity detected in the current
Battery, e.g. ‘BAT:
46
%’;
Test Order
: Define the test sequence. There is two sequence modes: Sequential Test
Mode and Random Test Mode. The default mode is Sequential Test Mode, it would
displays ‘ORDER: SEQ’ as in the above screen;
LOG File Name
: Display the file name of the test log, e.g.
Custom
.Log in the above
screen;
Start Test Time
(S.TIME): Display the test start time for the current test item or the test
script, e.g. ‘S.TIME: 2008-0
2
-16
00
:42:28’ in the above screen;
Break On Error
: Display ‘HALT’ as shown in the above screen when ‘Break On Error’
is enabled;
Wait On Error
: Display ‘WAIT’ as shown in the above screen when ‘Wait On Error’ is
enabled;
Pause Enable
: Display ‘PAUSE’ when “Pause Enable” is enabled;
Manual Interrupt Method
: Display ‘Esc: Break’ to tell the user how to manually
interrupt the test process.
Summary of Contents for Satellite L350D series
