background image

34

Introduction

This guide

5.375 x 8.375 ver 2.3

The product specifications and configuration information are designed 
for a product Series. Your particular model may not have all the features 
and specifications listed or illustrated. For more detailed information 
about the features and specifications on your particular model, please 
visit Toshiba’s Web site at 

pcsupport.toshiba.com

.

While Toshiba has made every effort at the time of publication to ensure 
the accuracy of the information provided herein, product specifications, 
configurations, prices, system/component/options availability are all 
subject to change without notice. For the most up-to-date product 
information about your computer, or to stay current with the various 
computer software or hardware options, visit Toshiba’s Web site at 

pcsupport.toshiba.com

This guide

This guide introduces the computer’s features. You can:

Read the entire guide from beginning to end.

Skim through and stop when a topic interests you.

Use the table of contents and the index to find specific 
information.

NOTE

Summary of Contents for Satellite L40













































































































































































































Reviews: