Toshiba Satellite L500D Series Maintenance Manual Download | Manualshive

Page: 131 / 246

background image

Error! Use the Home tab to apply

2 to the text that you want to appear here. Error! Use the

Home tab to apply

2 to the text that you want to appear here.

4 Replacement Procedures

Satellite L500D Maintenance Manual

4-3

Safety Precautions

Before you begin disassembly read the following safety precautions carefully. Be sure to follow
them while you are working.

DANGER:

1.

Always use the genuine batteries or replacement batteries authorized by Toshiba.
Batteries other than those differ in specifications and are incompatible with the laptop.
They may burst or explode. To avoid leakage of alkaline solutions, never heat or
disassemble the battery packs. Never throw the battery packs into a fire. If this is
violated, they will explode.

2.

The components such as the power supply and inverter carry high voltages. When you
partially disassemble the laptop and turn on the components, use extreme care not to
touch the connectors and components to avoid the risk of electrical shock. Do not
disassemble individual components during first-level maintenance.

WARNING:

1.

To avoid the risk of electrical shock, turn the laptop off and remove the AC adapter from
the electrical outlet.

2.

Because the battery in the laptop is left charged, the risk of electrical shock remains
even after the AC adapter is removed from the electrical outlet. To avoid the risk of
electrical shock, be sure to remove any metal jewelry or accessories such as necklaces,
bracelets, and rings before starting work. Never work with damp or wet hands.

3.

To avoid personal injury, use care to avoid the sharp edges or corners of the
components.

«
...
129
130
131
132
133
...
»

Summary of Contents for Satellite L500D Series























































































































































































































































Reviews:

No comments

Related manuals for Satellite L500D Series

ToughBook CF-72 Series

Brand: Panasonic Pages: 68

Touchbook CF-50 Series

Brand: Panasonic Pages: 56

Toughbook CF-T8EWATZJM

Brand: Panasonic Pages: 133

Toughbook CF-T8EWATZJM

Brand: Panasonic Pages: 40

Toughbook CF-31AGP7B2M

Brand: Panasonic Pages: 36

Toughbook CF-H1ADBAZCM

Brand: Panasonic Pages: 113

Brand: Gateway Pages: 1

Brand: Acer Pages: 99

Brand: Acer Pages: 104

Inspiron 14 5000 Series

Brand: Dell Pages: 115

Inspiron 24 5410 All-in-One

Brand: Dell Pages: 27

Inspiron 17 7000 Series

Brand: Dell Pages: 2

Brand: Dell Pages: 77

Inspiron 16 Plus 7620

Brand: Dell Pages: 26

Inspiron 17 7000 Series

Brand: Dell Pages: 23

Brand: Dell Pages: 222

Brand: Dell Pages: 88

Inspiron 16 Plus 7620

Brand: Dell Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands