Toshiba Satellite L550 series Maintenance Manual Download

Page: 143 / 241

4 Replacement Procedures

Error! Use the Home tab to apply

2 to the text that you want to

appear here. Error! Use the Home tab to apply

2 to the text that you want to appear here.

Satellite L550 Maintenance Manual

4-16

4.5

ODD

Removing the ODD Bay Module

NOTE:

The installation and removal procedures are the same for all the modules that can be

installed in the ODD bay. See the appropriate sections for the disassembly procedures of
specific modules.

Remove the ODD bay module according to the following procedures and Figure 4.6.

Figure 4.6 Removing the ODD Bay module

1. Turn the laptop upside down.

2. Remove one M2.5x6 screw.

3. Push the ODD bracket in the direction of the arrow.

CAUTION:

Handle the ODD bay module carefully it can become hot during operation.

M2.5x6*1

Summary of Contents for Satellite L550 series


















































































































































































































































Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands

Toshiba Satellite L550 series, Maintenance Manual

Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands