Toshiba Satellite L550 series Maintenance Manual Download

Page: 153 / 241

4 Replacement Procedures

Error! Use the Home tab to apply

2 to the text that you want to

appear here. Error! Use the Home tab to apply

2 to the text that you want to appear here.

Satellite L550 Maintenance Manual

4-26

4.9

Bluetooth Card

Removing the Bluetooth card

Remove the Bluetooth card according to the following procedures and Figure 4.15.

1. Remove the Bluetooth cable out from under the hooks on the logic upper assembly.

2. Press down the release latch and push the Bluetooth card in the direction indicated in

figure 4.15, sliding the Bluetooth card out.

3. Remove the card from the logic upper assembly.

Figure 4.15 Removing the Bluetooth card

Note:

Be careful not to damage the Bluetooth Card when connecting it with the cable. Make

sure the card is seated in the correct position.

Summary of Contents for Satellite L550 series


















































































































































































































































Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands

Toshiba Satellite L550 series, Maintenance Manual

Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands