Toshiba Satellite L550 series Maintenance Manual Download

Page: 156 / 241

Error! Use the Home tab to apply

2 to the text that you want to appear here. Error! Use the

Home tab to apply

2 to the text that you want to appear here.

4 Replacement Procedures

Satellite L550 Maintenance Manual

4-29

3. Remove one M2.5x4 screw from the touch pad bracket.

Figure 4.17 Removing the touch pad bracket

4. Remove the touch pad bracket.

Installing the Touch Pad Button board and Bracket

Install the touch pad button board and bracket according to the following procedures.

1. Seat the touch pad bracket in the correct position, then secure the bracket with one

M2.5x4 screw.

2. Seat the touch pad button board over the touch pad bracket, then secure the board with

two M2.5x4 screws.

M2.5x4*1

Summary of Contents for Satellite L550 series


















































































































































































































































Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands

Toshiba Satellite L550 series, Maintenance Manual

Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands