Toshiba Satellite L550 series Maintenance Manual Download

Page: 174 / 241

Error! Use the Home tab to apply

2 to the text that you want to appear here. Error! Use the

Home tab to apply

2 to the text that you want to appear here.

4 Replacement Procedures

Satellite L550 Maintenance Manual

4-47

4.20

Modem Card (Optional)

Removing the Modem Card

Remove the modem card according to the following procedures and Figure 4.34.

1. Remove two M2x3 screws that secure the modem card.

2. Flip the modem card over, and detach the cable connected to the card.

Figure 4.34 Removing the modem card

Installing the Modem Card

Install the modem card according to the following procedures.

1. Attach the cable to the back of the modem card.

2. Install the card in the correct position and secure it with two M2x3 screws.

M2x3*2

Summary of Contents for Satellite L550 series


















































































































































































































































Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands

Toshiba Satellite L550 series, Maintenance Manual

Search results

Summary of Contents for Satellite L550 series

Reviews:

Related manuals for Satellite L550 series

Brands by name

Popular brands