![background image](http://html.mh-extra.com/html/toshiba/satellite-l600d/satellite-l600d_maintenance-manual_1135837205.webp)
Chapter 4 Replacement Procedures
4.12 Mother Board
CAUTION: 1. when handling the mother board, always hold by the edges. Do not touch
the printed circuit face.
2. If replacing with a new mother board then should use T&D software
which is describing in the Chapter3.
Removing the mother board
The following describes the procedure for removing the mother board (See Figure 4-12-1).
1.
Disconnect the
LCD cable, Antenna, I/O board FFC, BT wire, SIM FFC, TP
board FFC, Power board FFC, DC-IN cable
from the connector on the mother
board.
2.
Remove the following
screws
securing the mother board and remove the
mother
board
.
M2.0
5.0 screw
x3
Figure 4-12-1 Remove the mother board
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
41