User’s Manual
4-21
Operating Basics
■
Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD or Blu-ray disc.
■
Do not perform any of the following actions:
■
Operate the computer for any other function, including using a
mouse or Touch Pad, or closing/opening the display panel.
■
Bump or cause vibration to the computer.
■
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■
Open the DVD drive.
■
Install, remove or connect external devices, including the
following: SD/SDHC/SDXC memory card, USB device, external
display, optical digital devices.
■
Please verify your disc after recording important data.
■
DVD+R/+RW disc cannot be written in VR format.
■
Not support to output VCD and SVCD format.
3. About recorded DVDs and Blu-ray discs
■
When playing your recorded DVD on your computer, please use the
TOSHIBA DVD PLAYER.
■
When playing your recorded Blu-ray Disc on your computer, please
use the WinDVD BD for TOSHIBA.
■
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
■
Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
■
Some BD-Writer/BD-Combo drives for personal computers or other
Blu-ray disc players may not be able to read BD-R/RE discs.
TOSHIBA DVD PLAYER
Please be aware of the following limitations when you use the TOSHIBA
DVD PLAYER:
Notes on use
■
"TOSHIBA DVD PLAYER" software is supported for playback of DVD-
Video and DVD-VR.
■
Frame dropping, audio skipping or out of synch audio and video may
occur during playback of some DVD-Video titles.
■
Close all other applications when using the “TOSHIBA DVD PLAYER”.
Do not open any other applications or carry out any other operations
during DVD-Video playback. Playback may stop or not function properly
in some situations.
■
Unfinalized DVDs created on home DVD recorders may not be playable
on the computer.
