User’s Manual
4-30
Operating Basics
4. In the
General
tab, select a country or region in the Country/Region list
and then click
OK
.
5. Click
OK
in the
Phone and Modem
window.
Connecting the modular cable
To connect the modem's modular cable, follow the steps as detailed below:
1. Plug the end of the modular cable into the computer's modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Figure 4-9 Connecting the internal modem
Please check whether the region you have selected is supported by this
computer. If you select a region that is not supported, local settings of the
modem will default to the United States.
■
Connection to any communication line other than an analog phone line
could cause a computer system failure.
■
Connect the built-in modem only to ordinary analog phone lines.
■
Never connect the built-in modem to a digital line (ISDN).
■
Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
■
Never connect the built-in modem to a key telephone system for
residences or offices.
■
Avoid using your computer modem with the telephone cable connected
during an electrical storm. There may be a remote risk of electric shock
from lightning.
1. Modem jack
2. Modular cable
1
2
Do not pull on the cable or move the computer while the cable is
connected.
