4.16 Display Assembly
4 Replacement Procedures
Satellite L670/L675/Pro L670 Maintenance Manual
[CONFIDENTIAL]
4.16
Display Assembly
Removing the Display Assembly
CAUTION:
Use care to avoid the antenna cable being caught between the display assembly and the
laptop.
Remove the display assembly according to the following procedures and Figure 4.27.
1.
Peel away the clear tape securing the LVDS cable connector in place, and disconnect the
LVDS cable from the motherboard.
2.
Peel away the tape securing the two antenna cables (black and white) and the LVDS
cable, and pull the cables from the routing channels on the logic lower assembly.
3.
Remove the LVDS cable from the logic lower assembly’s rib.
4.
Remove the tapes from the logic lower assembly.
5.
Remove the four M2.5x5 screws securing the display assembly.
6.
Remove the display assembly from the logic lower assembly.
Summary of Contents for Satellite L670
Page 34: ......
Page 95: ...3 Tests and Diagnostics Satellite L670 L675 Pro L670 Series Maintenance Manual CONFIDENTIAL ...
Page 120: ...3 Tests and Diagnostics Satellite L675 Satellite Pro L675 Series Maintenance Manual 32 ...
Page 250: ...Figure LA keyboard Satellite L670 L675 ProL670 Series Maintenance Manual CONFIDENTIAL 17 ...