Toshiba Satellite L675D Pro Maintenance Manual Download

Page: 119 / 245

3 Tests and Diagnostics

3.18 EE--PROM Setting

This EE-PROM SETTING will set the computer’s function status into EEPROM, included
supported function and no support function.

NOTE: Should perform EE-PROM SETTING once change M/B. It defined as normal rule.

The screen should display as below:

NOTE: when you select related program to setting the EEP-ROM, Before show below
screen, the D3E function will auto enable.

Set MIC Function Status in EEPROM (Disable/Enable)

Set HDMI Function Status in EEPROM (Disable/Enable)

Check Touch Pad Status in EE-PROM

Set and Check Speaker EQ Status in EE-PROM

Set BIOS Language in EE-PROM (English/Japanese/French)

Set and Check SKUID Status(Set/Check)

Set NON_OS function flag in EE-PROM (NONEOS/ HAVEOS)

Set NO Support Function Disable

9. Back To Test Title

Satellite L675 / Satellite Pro L675 Series Maintenance Manual

Summary of Contents for Satellite L675D Pro






















































































































































































































































Search results

Summary of Contents for Satellite L675D Pro

Reviews:

Related manuals for Satellite L675D Pro

Brands by name

Popular brands

Toshiba Satellite L675D Pro, Maintenance Manual

Search results

Summary of Contents for Satellite L675D Pro

Reviews:

Related manuals for Satellite L675D Pro

Brands by name

Popular brands