Toshiba Satellite L675D Pro Maintenance Manual Download | Manualshive

Page: 65 / 245

background image

2 Troubleshooting

Procedures

[CONFIDENTIAL]

Satellite A130/A135 /Satellite Pro A130 Series Maintenance Manua

This section describes how to determine if the computer’s modem is functioning properly.
Figure 2-9 outlines the process. Perform the steps below starting with Procedure 1 and
continuing with the other procedures as required.

Procedure 1: Telephone line connection check

Procedure 2: Modem card connection check

Procedure 3: Modem card replacement check

Procedure 1

Telephone line connection check

The telephone cable may be damaged or the connections may be loose. Use windows
application to check device can work fine or not. Attempt to connect the computer to a
network through using the modem. If the modem does not function at all, go to Procedure 3.
If the attempt fails because the computer detects no telephone signal, the fault may be in the
telephone cable, the wall socket or the modem port. Perform Check 1:

Check 1

Make sure telephone cable is firmly plugged into both the telephone wall socket
and the modem port of the computer. If the cable is connected correctly, go to
Check 2.

Check 2

Make sure the modem port is firmly secured to the system board of the computer.
If the malfunction remains, go to Check 3.

Check 3

The telephone cable may be damaged. Replace with a good cable. If the
malfunction remains, go to Procedure 2.

Procedure 2

Modem card connection check

Disassemble the computer following the steps described in Chapter 4,

Replacement

Procedures

and ensure that the modem card is well connected to the system board. If the

problem persists, perform Procedure 3.

Procedure 3

Modem replacement check

The modem card or RJ-11 jack may be faulty. Try replacing them. If the problem persists, the
system board may be defective or damaged. Replace the System Board with a new one
following the steps in Chapter 4,

Replacement Procedures

.

«
...
63
64
65
66
67
...
»

Summary of Contents for Satellite L675D Pro






















































































































































































































































Reviews:

No comments

Related manuals for Satellite L675D Pro

scieneo. amplio VI

Brand: Dynatech Pages: 52

Brand: Acer Pages: 73

Brand: Argus Pages: 12

Brand: LEXIBOOK Pages: 11

Brand: Dell Pages: 81

Brand: Dell Pages: 20

Brand: Samsung Pages: 34

Brand: Samsung Pages: 78

Brand: Samsung Pages: 83

Brand: Samsung Pages: 128

Brand: Toshiba Pages: 10

Brand: Adam Hall Pages: 2

VAIO VGN-Z890FJB

Brand: Sony Pages: 2

Brand: Sony Pages: 2

VAIO VGN-Z890FKB

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 2

VAIO VGN-Z610YB

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands