Chapter 4 Replacement Procedures
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
30
4.7 Touch Pad Switch Board, Touch Pad Board and Touch Pad
Removing the Touch Pad Switch Board, Touch Pad Board and Touch Pad
The following describes the procedure for removing the above boards.
1.
Turn over the machine and remove battery.
2.
Remove Top Cover.
3.
Turn over Top Cover.
4.
Loose SCREW M2.0*2.5F 2PCS and pull the cable from the connector on Touch Pad
Board to take off Touch Pad Switch Board. (see Figure 4-7-1)
Figure 4-7-1 Remove switch board
5.
Loose SCREW M2.0*2.5F 3PCS and pull the cable from the connector on Touch Pad
Board to take off it. (see Figure 4-7-2)