Chapter 4 Replacement Procedures
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
41
Installing the Display Assembly
The following describes the procedure for installing the Display Assembly.
1.
Inserting the pole of hinge to the hole of Hinge Assembly, set the Display Assembly
with hands on the base assembly.
2.
Secure the hinges with the following screws M2.5 *6.5F 4PCS.
3.
Connect the LCD harness to the connector on the system board.
4.
Put the DC-IN connector to the Base Assembly.
5.
Arrange the wireless antenna cables and 3G antenna cables along the guide and
contact with the connector with hands.
Figure 4-10-5 Arrange and connect Wireless LAN cable
6.
Install Top Cover Assembly.
NOTE: If Fingerprint or Dust left on LCD screen during disassembly and assembly
LCD units, please follow Appendix A to clean it.