104
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
Configuring your computer for Hibernation
1
Open the
Start
menu, click
Control Panel
, then
Performance and Maintenance
.
2
Click the
Toshiba Power Management
icon.
3
Click the
Setup Action
tab.
4
Select
Hibernation
for the options you want.
❖
When I press the power button
Set this option to
Hibernate
so that the computer will go
into Hibernation mode when you press the power button.
❖
When I close the lid
Set this option to
Hibernate
so that the computer will go
into Hibernation mode when you close the display panel.
5
Click
Apply
.
6
Click
OK
.
The computer is now set to automatically enter into
Hibernation when your option settings occur.
Once the computer is configured, place the computer into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the hibernation
options selected.
Using Hibernation
Follow these steps to power down the computer using
Hibernation:
1
Click
Start
, select
Turn off computer
.
The Turn off computer dialog box appears.
2
Hold down the
Shift
key.
The Stand by option changes to the Hibernation option.
