166
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.3
Memory problems
Incorrectly connected or faulty memory modules may cause
errors that seem to be device-related. It is worthwhile
checking for these first:
1
Turn off the computer via the Start menu.
2
Remove the memory module.
3
Reinstall the memory module, following the instructions
in
“Using the computer for the first time” on page 54
, and
making sure it is seated properly.
4
Check for the error again.
5
If the error recurs, remove the memory module entirely
and check for the error again.
If removing the memory module eliminates the error, the
memory module may be faulty. If the error recurs without
the memory module installed, the error is not caused by
the memory module.
TECHICAL NOTE: You must have a least one memory module
installed for the computer to work.
Toshiba recommends using only memory modules approved
by Toshiba.
Power and the batteries
Your computer receives its power through the AC adapter and
power cord/cable or from the system batteries (main battery
and optional secondary battery). Power problems are
interrelated. For example, a faulty AC adapter or power cord/
cable will neither power the computer nor recharge the
batteries.
NOTE
