Toshiba Satellite P25 User Manual Download

Page: 98 / 232

Learning the Basics

Using Stand by

5.375 x 8.375 ver 2.3

Using Stand by

Follow these steps to power down the computer using the
Stand by:

Click

Start

, select

Turn off computer.

The Turn off computer box appears.

Click

Stand By.

Sample Turn off computer dialog box

The computer saves the status of all open programs and files
to memory, turns off the display, and goes into a low-power
mode. The on/off light blinks to indicate the machine is in
Stand by mode.

If you power down using the Stand by and the battery
discharges fully, your information will be lost. Be sure to save
your work first.

Summary of Contents for Satellite P25









































































































































































































































Search results

Summary of Contents for Satellite P25

Reviews:

Related manuals for Satellite P25

Brands by name

Popular brands

Toshiba Satellite P25, User Manual

Search results

Summary of Contents for Satellite P25

Reviews:

Related manuals for Satellite P25

Brands by name

Popular brands