background image

71

Getting Started

Caring for your computer

5.375 x 8.375 ver 2.3

Caring for your computer

This section gives tips on cleaning and moving your 
computer, and explains how to fit an antitheft lock. For 
information about taking care of your computer’s battery, see 

“Running the computer on battery power” on page 101

.

Cleaning the computer

To keep your computer clean, gently wipe the display panel 
and exterior case with a lightly dampened cloth. Ask your 
Toshiba dealer for suggestions for appropriate cleaning 
products.

Keep liquid, including cleaning fluid, out of the computer’s 
keyboard, speaker grille, and other openings. Never spray 
cleaner directly onto the computer. Never use harsh or caustic 
chemical products to clean the computer.

Moving the computer

Before moving your computer, even across the room, make 
sure all disk activity has ended (the disk activity lights stop 
glowing) and all external peripheral cables are disconnected.

Never pick up the computer by its display panel or by the back 
(where the ports are located).

Although your notebook computer is built to withstand 
reasonable shock and vibration, transport it in a carrying case 
for long trips. You can purchase a carrying case from your 
Toshiba dealer or visit Toshiba’s Web site at 

toshiba.com

.

Summary of Contents for Satellite P25









































































































































































































































Reviews: