When Sleep and Music function is enabled, it is not possible to mute
sound from the speaker even by connecting headphones to the
Headphone/Microphone combo jack. There is also no sound from the
headphone.
When Sleep and Music function is enabled, it is possible to play sound
from the computer’s speaker by connecting an audio cable to the
Headphone/Microphone combo jack. Using this function discharges
the computer’s battery. Therefore, it is recommended that the
computer be connected to an external power source via the AC
Adaptor.
When using the Sleep and Music function, connect the computer and
Audio device with an audio cable.
When using the Sleep and Music function, the volume level can not be
changed from the computer.
The volume adjustment and mute setting might be different between
Windows mode and Sleep and Music mode. Before connecting the
audio device to the computer, turn down the volume of the audio
device. Sound quality may also be different.
Use the Sleep and Music function with the display open.
Function under Battery Mode
This option can be used to enable/disable Sleep and Music under battery
mode. It also displays the remaining battery capacity.
Move the slider to enable or disable this function.
Enabled
Enables Sleep and Music function under battery
mode.
Disabled
Enables Sleep and Music function only when the
AC adaptor is connected.
Disable features when
the battery level
reaches
Specifies the lower limit of remaining battery life
by moving the slider bar. If the remaining battery
life falls below the setting, the Sleep and Music
function will be stopped.
This setting is only available when the
Function
under Battery Mode
is enabled.
TOSHIBA Media Player by sMedio T
Please be aware of the following limitations when you use the TOSHIBA
Media Player by sMedio T:
Notes on use
TOSHIBA Media Player by sMedio T is a multimedia player which
can be used to play back video, music and photo.
User's Manual
5-14