TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
6100 Series
Satellite Pro
TM
4. Disconnect the
left speaker cable
from
PJ310
and the
right speaker cable
from
PJ311
on the top board.
5. Disconnect the
LCD/FL harness
from
PJ5002/5001
and
the
IPS membrane switch
from
PJ122
on the video board.
6. Lift out the
top cover assembly
.
Note:
When re- installing the top cover, ensure that the bluetooth
coaxial cable is properly routed to the Bluetooth slot.
TOP COVER REMOVAL
COOLING MODULE REMOVAL
1. Disconnect the
fan cable
from
PJ8770
on the top
board.
2. Remove
two M2.5x6 black flat head screws
and
four M2x4 brass screws
securing the cooling module.
3. Lift out the
cooling module
.
CPU REMOVAL
1. Insert a
flat head screwdriver
in the
CPU lock
and
rotate it counter-clockwise to unlock the
CPU
.
2. Lift out the
CPU
.
NOTE: When installing the CPU, make sure that a silicone
grease is applied before attaching the heat sink.
Please refer to FSB-200112 for the complete
procedures on how to apply the silicone grease.
LCD/FL
harness
Left/Rigth speaker cable
PJ310
PJ302
PJ5002
IPS membrane switch
PJ122
PJ5001
PJ8770
Cooling
module
M2X4 brass screws
Fan cable
M2.5x6
black
flat head
screws
VIDEO BOARD REMOVAL
1. Remove
three 2x4 brass screws
securing the video
board.
2. Disconnect the
video board
from PJ100 on the
system board.
Video board
M2x4 brass screws
CPU
lock
Silicone grease
CPU
Open
Close
