User’s Manual
3-15
Getting Started
Restoring the pre-installed software from your created Recovery
Discs
If the pre-installed files are damaged, you are able to either use the
Recovery Discs you have created or the hard disk drive recovery process
to restore the computer to the state it was in when you originally received it.
To perform this restoration, follow the steps below:
1. Load the Recovery Discs into the optical disc drive and turn off the
computer's power.
2. While holding down
F12
key on the keyboard, turn on your computer -
when
TOSHIBA Leading Innovation>>>
appears, release the
F12
key.
3. Use the up and down cursor keys to select the CD-ROM icon from the
menu. Please refer to the
Boot Priority
section in Chapter 7,
HW Setup
and Passwords
for further information.
4. A menu will be displayed from which you should follow the on-screen
instructions.
When the sound mute feature has been activated by pressing the
FN
+
ESC
key, be sure to disable this to allow sounds to be heard before starting
the restore process. Please refer to Chapter 5,
The Keyboard
, for further
details.
You can not use System Recovery Options if restoring the pre-installed
software without System Recovery Options.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
When drivers/utilities are installed, you can setup the respective
drivers/utilities from following place. To open the setup files, Click
Start
J
All Programs
J
TOSHIBA
J
Applications and Drivers
.
