background image

41

Getting Started

Registering your computer with Toshiba

Initial setup

The Startup screen is the first screen displayed when you turn on 
your computer for the first time. Follow the on-screen instructions 
on each screen in order to properly install the operating system and 
begin using your computer.

Setting up your software

When you turn on the computer for the first time, do not turn off the 
power again until the operating system has loaded completely. 

The names of windows displayed, and the order in which windows 
appear, may vary according to your software setup choices.

The first time you turn on your computer, the setup guides you 
through steps to set up your software. Follow the on-screen 
instructions.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba 
to send you periodic updates, announcements, and special offers 
applicable to your Product. Product registration can be completed 
by one of three methods:

1

From the Toshiba Web site at 

register.toshiba.com

: Type in the 

requested information and complete the registration process.

2

From the Start screen: Type 

Registration

 while in the Start 

screen, locate and complete the registration process.

3

From the Desktop: Move your pointer to the upper-right corner 
of the screen or swipe in from the right edge. When the 
Windows

®

 charms appear, click or touch the 

Search

 

(

charm and, in the Search field, type 

Registration

. In the list 

that appears, click or touch 

Registration

 and complete the 

registration process.

Failure to complete Product Registration will not diminish your 
rights under the Toshiba Standard Limited Warranty.

To register online, an Internet connection is required.

NOTE

NOTE

Summary of Contents for Satellite Pro C40 Series















































































































































































Reviews: