Chapter 3 Test Program for Field
3.10 Real Time Clock Test
To execute the Real Time Clock Test select
07
from the Diagnostic Test Menu, press
Enter
and follow the directions on the screen. The Real Time Clock Test contains three subtests
that test the computer’s real time functions. Move the highlight bar to the subtest you want to
execute and press
Enter
.
Subtest 01
Real Time
This subtest allows you to change the date and time. To execute the Real Time
Subtest, follow these steps:
1.
Select
Subtest
01
and the following displays:
[REAL TIME TEST]
Current date: mm-dd-yyyy
Current time: hh:mm:ss
Enter new date: mm-dd-yyyy
Enter new time: hh:mm:ss
Press [Enter] key to exit test
2. If the current date is not correct, enter the correct date at the "Enter new
date" prompt and press
Enter
. The following prompt displays:
Enter
new
time:
3. If the current time is not correct, enter the correct time using a 24-hour
format and press
Enter
.
NOTE
: If
NO
is selected for Test Loop on the Test Parameter menu, the
Real Time Clock Test menu displays.
If
YES
is selected for Test Loop on the Test Parameter menu, the screen
above displays and the test is executed again. Press
Ctrl + break
to return
to the Real Time Clock Test menu.
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (
960-Q08)
