Chapter 3 Test Program for Field
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (
960-Q08)
1.
Enter a
number
or
0
for
Loop Count
and press
Enter
.
Select a number from 1 to 65535 to define the number of times the Running Test
executes.
Select 0 to run the test continuously until halted by the user.
2.
Select the
NO
or
YES
for
Error Stop
and press
Enter
.
Select
NO
to keep the test running even if an error is found.
Select
YES
to stop the test program when an error is found.
NOTE:
All errors which occur during execution of the Running Test are logged
in the Log File.
3.
Press
Insert
to add a subtest.
4.
Press
Delete
to remove the selected subtest.
5.
Press
Enter
when you have finished editing the Running Test list.
6.
The following message displays:
Do you want to save the data?
Save to disk
Do not save
7.
Select the option and press
Enter
.
8. Select
03
from the Diagnostics Menu and press
Enter
to execute the Running Test.
NOTE:
If press
Ctrl+break
in the run-in process, please press more one any key
to exit.
