Toshiba Satellite Pro U400 Series Maintenance Manual Download | Manualshive

Page: 170 / 305

background image

Replacement Procedures

Satellite U400/Satellite Pro U400/PORTEGE M800

Maintenance Manual 4-2

Safety Precautions

Please read the following safety instructions before disassembling the computer and always
follow the instructions while working on the computer.

DANGER:

1. In the case of the battery, always use authentic parts or equivalent parts

approved by Toshiba. Other batteries may have different specifications
that are incompatible with the computer and may result in fire or
explosion.
Due to the risk of alkali fluid leaks, never attempt to heat or disassemble
the battery. Similarly, due to the risk of explosion, never expose the
battery to flame.

2. Some parts including the power supply and FL inverter generate high

voltages. If you need to turn on the power while disassembling the
computer, do not touch any connectors or other components due to the
risk of electric shock. Also, do not disassemble individual parts when
performing routine maintenance.

WARNING: 1. To prevent electric shock, turn off the power unplug the AC adapter from

the power source.

2. As the battery installed to the computer is typically already charged, the

risk of electric shock remains even when the AC adapter is unplugged
from the socket. To prevent electric shock, always take off any metal
jewelry or accessories such as necklaces, bracelets or rings before
working on the computer. Never work with wet or moist hands.

3. Take care not to injury yourself on any edges or corners.

CAUTION: 1. Confirm that replacement parts have compatible specifications before

replacing on the computer. Never use incorrect parts as these may cause
faults on the computer.

2. To prevent internal damage such as short circuits or burning, do not

allow any screws, paper clips, or other metal objects to fall into the
computer. When removing screws, always replace with the same size
screw. Ensure that all screws are fully tightened. Loose screws may
result in short circuits leading to overheating, smoke or flame.

3. To prevent electric shock, check that you have disconnected all cables

from a part before removing the part.

4. When connecting to the AC power supply, use only an AC adapter and

cable approved by Toshiba.

5. To prevent electric shock, ensure that all replacement parts are

compatible with the computer and that all cables and connectors are
securely connected.

«
...
168
169
170
171
172
...
»

Summary of Contents for Satellite Pro U400 Series


















































































































































































































































































































Reviews:

No comments

Related manuals for Satellite Pro U400 Series

4315 2004 - Aspire

Brand: Acer Pages: 114

3100 1868 - Aspire

Brand: Acer Pages: 113

1410 2039 - Aspire

Brand: Acer Pages: 104

4315 2004 - Aspire

Brand: Acer Pages: 111

4200 4091 - TravelMate - Core Duo 1.66 GHz

Brand: Acer Pages: 110

5050 4697 - Aspire

Brand: Acer Pages: 120

5050 4697 - Aspire

Brand: Acer Pages: 122

4200 4091 - TravelMate - Core Duo 1.66 GHz

Brand: Acer Pages: 81

4200 4091 - TravelMate - Core Duo 1.66 GHz

Brand: Acer Pages: 109

3100 1868 - Aspire

Brand: Acer Pages: 114

3100 1868 - Aspire

Brand: Acer Pages: 116

2480 2779 - TravelMate

Brand: Acer Pages: 95

Brand: Acer Pages: 89

5610 4179 - Aspire

Brand: Acer Pages: 98

5050 4697 - Aspire

Brand: Acer Pages: 120

TravelMate 220 series

Brand: Acer Pages: 80

TravelMate 220 series

Brand: Acer Pages: 81

Brand: Clevo Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands