User’s Manual
Glossary-5
Glossary
computer program:
A set of instructions written for a computer that enable
it to achieve a desired result.
computer system:
A combination of hardware, software, firmware, and
peripheral components assembled to process data into useful
information.
configuration:
The specific components in your system (such as the
terminal, printer, and disk drives) and the settings that define how
your system works. You use the HW Setup program to control your
system configuration.
control keys:
A key or sequence of keys you enter from the keyboard to
initiate a particular function within a program.
controller:
Built-in hardware and software that controls the functions of a
specific internal or peripheral device (e.g. keyboard controller).
co-processor:
A circuit built into the processor that is dedicated to
intensive math calculations.
CPS:
Characters Per Second. Typically used to indicate the transmission
speed of a printer.
CPU:
Central Processing Unit. The portion of the computer that interprets
and executes instructions.
CRT:
Cathode Ray Tube. A vacuum tube in which beams projected on a
fluorescent screen-producing luminous spots. An example is the
television set.
cursor:
A small, blinking rectangle or line that indicates the current position
on the display screen.
D
data bits:
A data communications parameter controlling the number of bits
(binary digits) used to make up a byte. If data bits = 7 the computer
can generate 128 unique characters. If data bits = 8 the computer
can generate 256 unique characters.
data:
Information that is factual, measurable or statistical that a computer
can process, store, or retrieve.
DC:
Direct Current. Electric current that flows in one direction. This type of
power is usually supplied by batteries.
default:
The parameter value automatically selected by the system when
you or the program do not provide instructions. Also called a preset
value.
delete:
To remove data from a disk or other data storage device.
Synonymous with erase.
device driver:
A program that controls communication between a specific
peripheral device and the computer. The CONFIG.SYS file contains
device drivers that MS-DOS loads when you turn the computer on.
dialog box:
A window that accepts user input to make system settings or
record other information.
