SD Card (SD memory card, SDHC memory card and SDXC memory
card)
Set the write-protect switch to the lock position, if you do not want to record
data.
Inserting a memory media
The following instructions apply to all types of supported media devices. To
insert a memory media, follow the steps as detailed below:
1.
Turn the memory media so that the contacts (metal areas) face down.
2.
Insert the memory media into the memory media slot on the side of
the computer.
Figure 4-5 Inserting a memory media
1
2
1. Memory media slot
2. Memory media
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
Be careful not to get the memory media to be impacted or shocked
while it is being inserted into the slot.
Take care when inserting the memory media card into the slot, as
accidental impact could result in damage to the media card.
3.
Press the memory media gently to ensure a firm connection is made.
Be careful not to press too hard to avoid damaging the media card.
The memory media is partially extended beyond the slot.
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
User's Manual
4-12
