Cooling vents
The cooling vents help the processor to avoid
overheating.
Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.
Carefully clean the dust on the cooling vents’ surface using a soft cloth.
Underside (Z50-A)
The following figures show the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.
Figure 3-17 The underside of the computer (Z50-A)
2
1
1. Cooling vents
2. Docking port*
* Provided with some models.
Product appearance depends on the model you purchased.
Cooling vents
The cooling vents help the processor to avoid
overheating.
Docking port
This port enables connection of an optional
TOSHIBA Hi-Speed Port Replicator III 180W/
120W described in
.
Some models are equipped with a Docking port.
Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is
applicable with this Docking port.
Do not attempt to use any other Port Replicator.
Keep foreign objects out of the docking port. A pin or similar object
can damage the computer's circuitry.
User's Manual
3-24
