To access the utility, click
Start -> All Programs -> TOSHIBA -> Tools &
Utilities -> TOSHIBA Docking Station Utility
.
System sleep undocking operation will function under the following
conditions:
Select
Do nothing
for
When I close the lid
by clicking
Start ->
Control Panel -> System and Security -> Power Options ->
Choose what closing the lid does
.
TOSHIBA Dock setting is currently set to
Enable
.
The computer’s lid is closed.
After closing the computer lid, wait a few seconds before pressing the
Eject button on the port replicator, otherwise the system may not go
to sleep.
Unexpected undocking may cause data loss on connected storage
device(s).
After an unexpected undock, there may be some delay before the
system goes into sleep mode.
Security lock
A security lock enables you to anchor your computer to a desk or other
heavy object in order to help prevent unauthorized removal or theft. The
computer has a security lock slot into which you can attach one end of the
security cable, while the other end attaches to a desk or similar object. The
methods used for attaching security cables differ from product to product.
Please refer to the instructions for the product you are using for more
information.
Connecting the security lock
In order to connect a security cable to the computer, follow the steps as
detailed below:
1.
Turn the computer so the security lock slot faces you.
2.
Align the security cable with the lock slot and secure it in place.
Figure 4-16 Security lock (Z30-A)
2
1
1. Security lock slot
2. Security lock
Product appearance depends on the model you purchased.
User's Manual
4-31
