background image

G

etting Started

2

English

Safety Instructions

This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. 
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembling is prohibited.

SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT.

This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So,
please read the points below for your own safety. 

**************

DO

read the operating instructions before you attempt to use the equipment.

DO

ensure that all electrical connections (including the mains plug, extension leads and interconnections
between the pieces of equipment) are properly made and in accordance with the manufacturer's
instructions. Switch off and withdraw the mains plug before making or changing connections.

DO

consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO

be careful with glass panels or doors on equipment.

**************

DON'T

remove any fixed cover as this may expose dangerous voltages.

DON'T  

obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains,
etc. Overheating will cause damage and shorten the life of the equipment.

DON'T

allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as
vases, to be placed on the equipment.

DON'T

place hot objects or naked flame sources such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and lead to fires.

DON'T

use makeshift stands. 

DON'T

leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make
sure that your family know how to do this. Special arrangements may need to be made for infirm or
handicapped people.

DON'T

continue to operate the equipment if you are in any doubt it working normally, or if it is damaged in any
way-switch off, withdraw the mains plug and consult your dealer.

ABOVE ALL

---NEVER let anyone especially children push anything into holes, slots or any other opening in the case-

this could result in a fatal electrical shock;

---NEVER guess or take chances with electrical equipment of any kind
---it is better to be safe than sorry!

**************

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS

Summary of Contents for SD-36VESE






























































Reviews: