37
Parental control setting
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the unit.
1) Press
C
or
D
to select “Parental”, then press
B
or
A
until the level you require appears.
• Level Off:
The parental controlsetting does not
function.
• Level 8:
All DVD software can be played back.
• Level 1:
DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press
C
or
D
to select “Password”.
Press number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CLEAR.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct pass
word.
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
OSD Language
The setup language can be selected.
English: To display OSD language is English.
Francais: To display OSD language is Francais.
Espanol: To display OSD language is Espanol.
To change the parental level
1) Press
C
or
D
to select “Password”.
2) Press number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press
C
or
D
to select “Parental”, then press
B
or
A
to change the parental level.
5) Press
C
or
D
to select “Password”, then press
number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
Language
OSD Language English
English
Francais
Espanol
Other
/Enter/Setup/Return
Picture
Parental
Sound
Language
Password
Parental
Picture
Parental Other
Off
0 9/Clear
/Enter/Setup/Return
Sound
Parental
Other
Note:
If each setup (pages 35~37) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel, press
7 on the remote control. “PASSWORD CLEAR” ap-
pears on the screen.
5. Enter a new password again.
Notes:
• Depending on the discs, the unit may not be able to limit
playback.
• Some discs may not be encoded with specific rating level
information though its disc jacket says “adult.”
For those discs, the parental control feature will not work.
2C01501A P32-37
12/16/03, 19:59
37
