background image

OPERA

TION

27

Operation with tape (Continued)

Copying from DVD to VCR

You can copy the contents of a DVD to a VHS tape.

1. Insert the disc you wish to copy into the DVD deck

and close the disc tray.

2. Insert a blank VHS video tape into the VCR deck.

3. Find the place on the DVD from which you want to

start dubbing using the PLAY, FWD, REW and
PAUSE functions. 
For best results, pause playback at the point from
which you want to record.

4. Press the COPY button on the front panel or

REC/OTR on the Remote Control. The DVD goes
into PLAY mode and the VCR goes into RECORD
mode. If the DVD disc menu appears, you may need
to press PLAY (

N

) manually to begin copying.

5. When the DVD is finished playing, press STOP (

x

)

to end copying. 

Notes:

If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs (or Discs). “LOCK” is dis-
played in the display window. 

You must stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.

When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.

On-Screen Display - VCR

Some of these functions will be displayed every time
the DVD+VCR is operated.

TAPE SPEED DISPLAY

FUNCTION DISPLAY

HI-FI DISPLAY

CHANNEL DISPLAY

STEREO/SAP DISPLAY

(MONO is not displayed)

DATE DISPLAY

CLOCK/COUNT/REMAIN DISPLAY

Each press of the ENTER changes the TV screen in the
following sequence.

Real-Time Counter

If a tape with contents recorded on it is inserted into the
DVD+VCR, the real-time counter shows length of the tape 
running in hours, minutes, and seconds. 
Press CLOCK/COUNTER to select the real-time counter dis-
play. Every press of CLOCK/COUNTER changes the TV
screen as illustrated below.

Counter Memory 

This feature is useful if there is a section of tape you want
to view immediately after recording or if you want to return
to the same point several times.

1.

Begin recording or playing a tape.

2.

Press CLOCK/COUNTER until the real-time counter is 
displayed on the TV screen.

3.

At the point that you want to locate later, reset the real-
time counter to “0:00:00” by pressing CLEAR.

4.

Continue to play or record.

5.

Press STOP

(

x

when recording or playback finishes.

6.

Press REW

(

m

)

. The tape automatically stops when

the tape counter returns to about “0:00:00”.

Tape Remaining

This function displays the amount of time remaining on the
tape during recording or playback. Press
CLOCK/COUNTER repeatedly until the REM indicator 
displays on the TV screen during recording or playback.
The remaining tape length may not be displayed correctly
depending on the condition of the tape and the kind of the
tape (T-140, T-160, or T-210 etc.).

Notes:

The function displays can be seen displayed on the TV
screen for 5 seconds.  

The clock (or tape counter, tape remaining) mode will be
displayed until you press 

ENTER

.

The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remain-
ing tape length indicator appears after any tape operation.

PLAY

HI-FI 

CH  4

SP

STEREO

OCT  8 ,  SAT

2:15 PM

2:15 AM

0:05:25

REM 1:07

CLOCK

COUNTER

REMAINING TIME

REM 1:58

0:35:40

2:15 PM

STOP

CH  4

SP

STEREO

APR  30 , SAT

2:15 PM

Summary of Contents for SD-V383SC











































Reviews: