English
12
6 Customizing
This section describes the various setting option
of this DVD player.
1. If the setup option is greyed out, it means the
setting cannot be changed at the current state.
2. Press the
SETUP
button in stop mode to
display the setup screen.
General Audio Video Preference
- - General Setup Page - -
Go To Setup Page
TV Display
Angle Mark
OSD Lang
Screen Saver
Full
On
Eng
On
General
1. In Setup menu, use
b/B
to select
General
and press
OK
.
2. Press
v
/
V
to select an option and press
OK
.
3. Press
b
or the
RETURN
button to return to
the previous menu.
[TV Display]
Select the screen format according to how you
want the picture to appear on the TV.
{4:3 Pan Scan}
- For standard TV, it displays a
wide picture on the entire screen and cuts off the
redundant portions.
{4:3 Letter Box} - For standard TV, it displays
a wide picture with two black borders on the top
and bottom of 4:3 screen.
{16:9 Full}
- For a disc with the aspect ratio of
4:3, the output video is stretched into 16:9 full
screen.
{16:9 Normal}
- For a disc with the aspect ratio
of 4:3, the output video is resized vertically to
match what will be seen on the display.
[Angle Mark]
Some DVDs contain the scenes recorded with
multiple angles, which allow you to enjoy the
videos with your desired angles, therefore the
angle mark is displayed only when the DVD disc is
supportable for multi-angle and Angle Mark is set
to ON.
{On}
- Display the angle mark.
{Off}
- Hide the angle mark.
[OSD Lang]
Select the on-screen menu language.
[Screen Saver]
Turn On or Off the screen saver mode. It helps to
protect the TV screen.
{On}
- Set the screen saver active after
approximately 2 minutes without operation.
- The DVD player will switch to standby mode if
there is no operation after the screen saver is
engaged for approximately 18 minutes.
{Off}
- Turn off the screen saver mode.
- The DVD player will not switch to standby mode
automatically.
Audio
1. In Setup menu, use
b/B
to select
Audio
and
press
OK
.
2. Press
v
/
V
to select an option and press
OK
.
3. Use
v
/
V
to select the desired Audio setting
and press
OK
.
4. Press
b
or the
RETURN
button to return to
the previous menu.
Analog Setup
[Analog]
{Down Sampling}
- Downmixes the multi-
channel audio into two channel surround
compatible stereo. Choose when the unit is
connected to equipment that support virtual
surround function such as Dolby Pro Logic. This
mode make a downmix as decode surround
elements when the original audio does include
channel mode such as surround elements.
{Stereo}
- Downmixes the multi-channel audio
into two channel stereo. Choose when the unit
is connected to equipment that does not support
virtual surround function such as Dolby Pro Logic.
This mode make a stereo mix audio when the
original audio does not include channel mode such
as surround elements.
{Surround}
- Downmixes the multi-channel
audio into two channel virtual surround stereo.
Choose when the unit is connected to equipment
that does not support virtual surround function
such as Dolby Pro Logic.
[DRC]
Select the Dynamic Range Control mode which
makes it available to listen to a movie at a low
volume without losing sound clarity.
{On}
- Dynamic range compress.
{Off}
- Non-dynamic range compress.
SPDIF Setup
[SPDIF Output]
When you connect an audio system to the
COAXIAL DIGITAL OUT jack, the options are:
