background image

English

9

4 Preparation

Always follow the instructions in this chapter in 

sequence.

Note:
-  Use of controls or adjustments or performance  

of procedures other than herein may result in 

hazardous radia on exposure or other unsafe 

opera on.

Prepare the remote control

1. Open the battery cover down.

2.  Insert two AAA batteries with correct polarity 

(+ / -) as indicated.

3. Close the battery cover.

Notes: 
-  If you are not going to use the remote control 

for a long time, remove the batteries.

-  Do not use old and new or different types of 

batteries in combination.

-  Risk of explosion! Keep battery away from heat, 

sunshine or fire. Never discard battery in fire.

•   The maximum operable ranges from the 

unit are as follows.

-  Line of sight: approx. 10 m (original state)
-  Either side of the centre: approx. 7 m within 30°  

(original state)

-  Above: approx. 7 m within 30° (original state)
-  Below: approx. 7 m within 30° (original state)

 7m                 10m                 7m

Setting up the player

Find the correct viewing input

1.  Press 

1

 

ON/STANDBY

 to turn on this 

product.

2.  Turn on the TV and switch to the correct video-

in input (refer to the TV user manual on how to 

select the correct input).

Use the SETUP menu

1.  Press 

SETUP

 to display the setup screen in 

stop mode or no disc playback.

Summary of Contents for SD1020KB


















Reviews: