background image

8. SPECIFICATIONS

 

EO1-12030 

 

8.2 Options 

 

8- 2 

8.2 Options 

Option name 

Type 

Description 

DRWST-51A-4MV-QM 
DRWST-51A-8MV-QM 

24V-drive standard drawer 
Size and Weight: 

460(W) x 400(D) x 115(H) mm, 10Kg  

Money Case Type:  MC4,8 

DRWST-56-EMV-QM 

24V-drive flip top drawer 
Size and Weight: 

460(W) x 170(D) x 100(H) mm, 6Kg  

Money Case Type:  EURO case 

Type 

Bill holder  Coin tray  Mini coin case 

CDC 

Remarks 

4MV-QM 

No 

Yes 

With media slot 

8MV-QM  

Yes 

With media slot 

Drawer unit 

Drawer type 

EMV-QM 

No 

Yes 

With media slot 

Line display unit  LIUST-51-1AF-QM 

20 characters x 2 lines dot display 

TRST-56-P-1W-QM 

Parallel interface single thermal printer for 80 mm wide paper 
Cabinet color:  FW-2 

TRST-56-S-1W-QM 

Serial interface single thermal printer for 80 mm wide paper 
Cabinet color:  FW-2 

TRJST-52-3S-QM 

Serial interface 2-station thermal printer for 58-mm wide paper 

Printer Unit 

TRJST-52-3P-QM 

Parallel interface 2-station thermal printer for 58-mm wide paper 

POS keyboard 
unit 

PKBST-50-3-QM 

81 keys POS keyboard with PS/2 interface 

TFT monitor 

TFTST-56T-3V-QM 

12.1-inch TFT monitor equipped with the touch panel 
(with VGA board) 

Operation Unit 

LKBST-65 TT11-QM 

12.1-inch TFT monitor equipped with the 40 keys keyboard  
(The magnetic card reader is provided as an option.) 

KIT-7000-COM-QM-R 

COM6 connector kit for attaching the PCI slot 

KIT-7000-CD-QM-R 

Mounting kit for attaching the CD drive 

KIT-7000-CBL-QM-R 

COM relay cable kit for connecting the option TFT monitor 
(TFTST-56T) or the operation unit (LKBST-65) to the ST-7000. 

KIT-7000-2COM-QM-R 

Expansion I/O PC board that contains two COM ports and a 
powered USB port (24V).  

Mounting kit 

KIT-7000-PUSB-QM-R 

Expansion I/O PC board that contains two COM ports, four 
powered USB ports (12V x 3 and 24V x 1), a MICIN, and a 
LINEOUT.  

NOTE:  Model name with an “R” attached to the end indicates that the product complies with RoHS 

directive.  

 
 
 

Summary of Contents for ST-7000-C Series



















Reviews: