5. DIAGNOSTIC TEST OPERATION << Preliminary version >>
EO18-12017
5.4 Serviceman Diagnostic Test Program
5- 48
5.4.8.1 TRST-A1x Parallel Printer Test
In this test, printing and error detection of the printer connected to the POS terminal are checked.
(1) Operation
procedure
1. Select the
TRST-A1x-P Test(5)
button on the Printer Test Menu screen.
2. By clicking the
Sample Printing(1)
button, sample printing is performed. (“Printer Test” and 1-line
printing are printed on the receipt.)
3. After the sample printing ended, move the cursor onto the Cut Count edit box, then input a value.
4. By clicking the
Receipt Cut(4)
button, the receipt cut is performed according to the number of Cut
Count value set in Procedure 3.
5. When the printer performs correctly, click the
OK
button to terminate the test. If not, click the
NG
button.
(2) Error
code
Result
Error Code
Error Code Ex
Remarks
1 0
0
Click
the
[OK]
button to terminate the test.
-1 0
0
Click
the
[NG]
button to terminate the test.
-1 1
0
Open
error
-1 2
0
error
-1
3
0
Receipt cut error
(3) Corrective
action
Error
Cause & Measure
Print error
Possible causes of the error are as shown below.
•
Out of paper
•
The printer is shut down.
Receipt cut error
Possible causes of the error are as shown below.
•
Out of paper
•
The printer is shut down.
•
Cutter
failure
