Strata CTX Programming - Part 3: Telephone Button Programming 6/04
14-1
M
a
in
te
nance
Maintenance
14
This chapter provides Strata CTX maintenance procedures that can be activated from the programming
telephone. For SmartMedia, refer to
“Format/Unmount SmartMedia”
on
page 13-105
.
Data Backup
1. Format the SmartMedia using
“Format/Unmount SmartMedia”
on
page 13-105
(Program 908).
2. Insert the formatted SmartMedia into Strata CTX.
3. Backup data using
“Data Backup”
on
page 13-106
(Program 910). LED indicators should show the
following:
•
)%
~
)%
solid red light.
•
)%
intermittent green.
4. Press
)%
and choose Backup by pressing
on the telephone button pad.
CAUTION!
Never use Restore (2). It is not valid for current versions of CTX software and could
result in corrupt databases and system mis-operation.
5. Press
+ROG
. Backup for programmed data starts. The LED indicator
)%
consistently blinks green
during back up. After back up is complete,
)%
will flash inconsistently slower.
CAUTION!
Do not press
+ROG
while Backup is being performed.
6. Press
+ROG
twice to exit programming.
Backup Progress and Completion Indicators
You can monitor Backup progress by pressing the
)%
or
)%
buttons as follows. See
“Data Backup”
on
page 13-106
for more details.
•
If the value displayed in the LCD is increasing each time
)%
is pressed, the Backup is proceeding
successfully.
•
When the value displayed in the LCD for
)%
and
)%
are the same, the Backup process is
complete.
•
When the
)%
LED returns to an intermittent green, Backup is complete.
•
Press
)%
to verify Backup is completed. If the LCD displays
*1:
ALL_OK
the Backup was successful.
Summary of Contents for Strata CTX 100-S
