T1000 Series UPS 1000-3000VA Installation and Operation Manual
– 94086-001
6
To be performed by
Qualified Personnel
only.
1) Verify that the UPS is off and that the power cord is disconnected from the power
source.
2) Remove watches, rings or other metal objects.
3) Use tools with insulated handles to prevent inadvertent shorts.
4) Wear rubber gloves and boots.
5) Do not place tools or any metal parts on top of batteries.
6) Remove battery grounds during installation maintenance to reduce likelihood of
shock. Determine if the battery is inadvertently grounded. If inadvertently grounded,
remove source of ground.
7) Disconnect charging source prior to connecting or disconnecting battery terminals.
Contact with any part of a grounded battery can result in electrical shock
.
The likelihood of shock will be reduced if such grounds are removed prior to installation
or maintenance.
WARNING
